ADB EZ-Torque 24,000 lb. Black Oxide Hoist Ring, 23494
The ADB EZ-Torque 24,000 lb. Hoist Ring, part 23494, is a swivel hoist ring on a 1-1/2"-6 thread fitted with a jackbolt tensioner nut. It swivels 360° and pivots 180° under load and holds its full 24,000 lb. rating from 0° to 90° off the bolt axis.
Key specifications
- Capacity: 24,000 lb.
- Thread size: 1-1/2"-6
- Thread projection: 2.70″
- Movement: 360° swivel, 180° pivot
- Installation torque: 18 ft-lb. per jackbolt
Why EZ-Torque? A standard 24,000 lb. hoist ring has to be pulled to 800 ft-lb., which normally means locating and rigging a hydraulic torque multiplier. The jackbolt nut reaches the same clamp load at 18 ft-lb. per jackbolt, using an ordinary torque wrench. Jackbolts ship pre-lubricated: tighten crosswise, then in a circular pattern, to the value marked on the nut.
Questions about this product? Call (800) 733-2231 and we'll get you connected with someone who can help.
| Capacity(lbs) | A (in.) | B (in.) | C(in.) | D(in.) | E (+/- .12)(in.) | F(in.) | G(in.) | H(in.) | J(in.) | K(in.) | L(in.) | M(in.) | TL*(ft.-lbs.) | EZ-Torque*(ft.-lbs.) | Weight(lbs.) |
| 24,000 | 2.25 | 8.0 | 2.81 | 1-3/4 | 2.70 | 12.47 | 1-1/2 – 6 | 8.55 | 4.87 | 4.20 | 0.47 | 6.12 | 800 | 18 | 37.75 |
- Material:High strength 4140 alloy steel
- Design Factor:5:1, Magnetic Particle Inspected Per ASTM 1444. Hoist Rings retain the same rated load from 0 to 90 degrees from the bolt axis.
- Range of Movement:Swivel 360°, Pivot 180° Under Load
- Finish:Black Oxide finish for corrosion resistance*
- Typical Applications:ADB, the originator and leader in safety hoist rings, introduces another time and money saving innovation. ADB’s new EZ-Torque® Hoist Ring eliminates the need of locating and installing hydraulic torque multipliers for large hoist ring installations. A 75,000 lb. rated load hoist ring requires the mounting screw to be torqued to 4,300 ft.lbs. Using ADB’s EZ-Torque® Hoist Ring requires only a standard torque wrench and 92 ft.lbs. of torque per bolt!