ADB EZ-Torque 15,000 lb. Black Oxide Hoist Ring, 23490
The ADB EZ-Torque 15,000 lb. Hoist Ring, part 23490, is a swivel hoist ring on a 1-1/4"-7 thread fitted with a jackbolt tensioner nut. It swivels 360° and pivots 180° under load and holds its full 15,000 lb. rating from 0° to 90° off the bolt axis.
Key specifications
- Capacity: 15,000 lb.
- Thread size: 1-1/4"-7
- Thread projection: 1.89″
- Movement: 360° swivel, 180° pivot
- Installation torque: 10 ft-lb. per jackbolt
Why EZ-Torque? A standard 15,000 lb. hoist ring has to be pulled to 470 ft-lb., which normally means locating and rigging a hydraulic torque multiplier. The jackbolt nut reaches the same clamp load at 10 ft-lb. per jackbolt, using an ordinary torque wrench. Jackbolts ship pre-lubricated: tighten crosswise, then in a circular pattern, to the value marked on the nut.
Questions about this product? Call (800) 733-2231 and we'll get you connected with someone who can help.
| Capacity (lbs) | A (in.) | B (in.) | C(in.) | D(in.) | E (+/- .12)(in.) | F(in.) | G(in.) | H(in.) | J(in.) | K(in.) | L(in.) | M(in.) | TL*(ft.-lbs.) | EZ-Torque*(ft.-lbs.) | Weight(lbs.) |
| 15,000 | 1.75 | 6.0 | 2.11 | 1-1/4 | 1.89 | 8.73 | 1-1/4 - 7 | 6.50 | 3.76 | 3.20 | 0.35 | 3.88 | 470 | 10 | 16.00 |
- Material:High strength 4140 alloy steel
- Design Factor:5:1, Magnetic Particle Inspected Per ASTM 1444. Hoist Rings retain the same rated load from 0 to 90 degrees from the bolt axis.
- Range of Movement:Swivel 360°, Pivot 180° Under Load
- Finish:Black Oxide finish for corrosion resistance*
- Typical Applications:ADB, the originator and leader in safety hoist rings, introduces another time and money saving innovation. ADB’s new EZ-Torque® Hoist Ring eliminates the need of locating and installing hydraulic torque multipliers for large hoist ring installations. A 75,000 lb. rated load hoist ring requires the mounting screw to be torqued to 4,300 ft.lbs. Using ADB’s EZ-Torque® Hoist Ring requires only a standard torque wrench and 92 ft.lbs. of torque per bolt!