ADB Safety Engineered 4,000 lb. Long Bar Stainless Steel Hoist Ring, 29328
$620.65
The ADB Safety Engineered 4,000 lb. Long Bar Stainless Steel Hoist Ring, part 29328, is a 300 series stainless swivel hoist ring with a 7/8-9 mounting thread. ADB specifies the stainless line for corrosive, cryogenic and elevated temperature service up to 800°F. It swivels 360° and pivots 180° under load and holds its full 4,000 lb. rating from 0° to 90° off the bolt axis.
Key specifications
- Capacity: 4,000 lb.
- Thread size: 7/8-9
- Thread projection: 1.04″
- Movement: 360° swivel, 180° pivot
- Installation torque: 80 ft-lb., applied dry
Need a shorter body? The standard-length version of this ring is ADB 29101.
Confirming the capacity: ADB rates a stainless ring at half the capacity of the alloy steel ring in the same body size, so go by the number stamped on the ring rather than matching it by size.
Questions about this product? Call (800) 733-2231 and we'll get you connected with someone who can help.
| Capacity (lbs) | A (in.) | B (in.) | C(in.) | D(in.) | E (+/- .12)(in.) | F (+/- .060)(in.) | G(in.) | H (+/- .060)(in.) | J(in.) | K(in.) | L(in.) | M(in.) | TL(ft.-lbs.) | Weight(lbs.-oz.) |
| 4,000 | 1.40 | 4.80 | 1.71 | 1 | 1.04 | 8.11 | 7/8-9 | 5.14 | 3.00 | 2.37 | 0.24 | 4.52 | 80 | 6 lb. 12 oz |
- Material:300 Series Stainless Steel
- Design Factor:5:1, Hoist Rings retain the same rated load from 0 to 90 degrees from the bolt axis, Standard tolerance ± .030 inch unless otherwise specified
- Range of Movement:Swivel 360°, Pivot 180° Under Load
- Specifications:NDT: 100% Liquid Penetrant Tested Per ASTM E1417, Purification Process: Clean & Passivate Per ASTM A967, QQ-P-35 TYPE II
- Typical Applications:Use Stainless for Corrosive, Cryogenic or Elevated Temperature Environments
- 150% Proof Load Tested
Related Products
