STAHL SH 5 Ton Wire Rope Hoist 39 fpm/62 fpm, Dual Speed Model 5025

STAHLSH 5025-20 2/1
(No reviews yet)
The SH Series is a heavy-duty, compact, low maintenance wire rope hoist from STAHL. Providing load capacity ranges from 1 Ton to 15 Tons. Standard dual speed motor for smooth lifts with speed options. The STAHL SH wire rope hoist can be used by itself or together with a trolley for standard cranes. Optional short headroom monorail trolley and double girder trolley available. IP 66 protection for outdoor use without a protective roof.
Current Stock:
Adding to cart… The item has been added
Model SH Series
Model Number SH 5025-12 2/1
Capacity (Tons) 5
Lift (ft.) 39 - 131
Lifting Speed, Base Model (fpm) 25 / 3.9
Reeving (parts/reeving) 2/1
Motor, Base Model (HP) - Type 9.7 / 1.6 - H71
Voltage 440 - 480
  • Motor - Motor is located outside rope drum. The SH series has a highly efficient motor cooling, maintenance-friendly, temperature control system by ptc thermistors. IP 55 protection, thermal class F. Classified according to ISO, high duty cycle, and switching operation frequency.
  • Control - Robust control pendant with emergency stop palm button and control cable. All switching elements for hoist, cross, and long travel are 2-step. IP 65 protection. Additional control pendant options are available.
  • Brake System - Low-maintenance, asbestos-free, with no adjustment necessary brake. Brake system is IP 65 rated and is protected from environment for long-life and reliable operation.
  • Suspension - Standard, and optional short headroom monorail trolley, or top running double girder trolley available.
  • Wire Rope & Guide - Highly flexible, long life wire rope. Single-grooved rope drum helps guides and secures wire rope for low resistance lifts. Spheroidal graphite cast iron enclosure for wire rope and guide withstands various temperature ranges. 360° rope tensioner, helps prevent slack rope.
  • Overload Protection - Permanent electronic monitoring of suspended loads. Limited maximum load by load measurement at the rope anchorage for multiple reeving.
  • Gearing - All gear steps with lifetime lubrication in oil bath.
  • Frame - Low profile minimizes wasted space and reduces headroom. High-quality primer and top-coats. Standard paint system (polyurethane top-coat) to 3.1 mil on engine parts and SP-powder (saturated polyester) to 2.4 mil on steel parts.
  • Wire Rope End Stop - External limit switches protect against hook overtravel.