Thern 4HPFC Series 2,000 lb. Helical/Parallel Gear Power Winch w/Clutch
$6,950.00 - $7,310.00
(No reviews yet)
Write a Review
Thern
Thern 4HPFC Series 2,000 lb. Helical/Parallel Gear Power Winch w/Clutch
Thern 4HPFC series power winches feature helical/parallel gear with clutch, high efficiency gearing making them ideal for applications requiring long travel distances and faster line speeds. The enclosed, direct-drive gearing design delivers dependable operation and helps reduce maintenance, while a modular design means we can easily customize these winches to meet your exact specifications.
| A(in) | B(in) | C(in) | D(in) | E(in) | F(in) | G(in) | H(in) | J(in) | K(in) | L(in) | M(in) | N(in) | P(in) | R(in) | S-hole Diameter(in) |
| 38.50 | 17.00 | 6.00 | 8.00 | 2.38 | 0.88 | 19.88 | 17.00 | 1.00 | 20.00 | 10.00 | 7.56 | 0.63 | 15.75 | 7.88 | 19/32 |
| Capacity (lbs) | Load Speed (fpm) | Motor HP | Load Rating (lbs) | Line Speed (fpm) | Base Weight (lbs) | |||
| 1 st Layer | Mid Drum | Full Drum | 1 st Layer | Full Drum | ||||
| 2,000 | 20 | 1.0 | 2,100 | 1,300 | 1,000 | 17 | 38 | 270 |
- Manually operated jaw clutch, disengages for rapid payout of wire rope when not under load. Adjustable drag brake on the drum prevents over-spooling during payout. Clutch is for horizontal pulling only.
- Flange mounted motor is a 230/460 volt 3 phase, 60 cycle, IP55, TEFC severe duty, reversible, class F insulated, continuous duty brake motor.
- Standard motors comply with relevant standards including NEMA, MG1, ANSI, CSA, IEC and ABS.
- Load holding motor disc brake is spring set, electrically released for positive load control.
- Direct drive gear reducers, comprised of helical/parallel gears, deliver high efficiencies from 88% to 94% making winches well suited for applications requiring long travel distances and faster line speeds.
- The heat treated helical/parallel gear set provides improved durability and operates in an oil bath, enclosed in a high strength cast iron gearcase, SAE class 30. Double-lip oil seals keep oil in and contaminants out. Large capacity bearings ensure long life. Speed reducers meet AGMA standards.
- Flange style roller bearings are self-aligning with cast housings to maintain smooth drum rotation.
- Welded steel drum with outside flange anchors allow for uniform winding and help extend life of wire rope. Anchors allow cable to be over wound or under wound from either side of the drum.
- Extended solid steel drum for uniform loading.
- Two-year Limited Warranty
Related Products
