Lifting Clamps

Renfore Model S

The Model S is a vertical lifting clamp and is an effective tool for construction and erection. It incorporates a 'Lock Open,' 'Lock Closed' feature which facilitates attaching and removing the clamp from the plate.

Renfroe Model FR

The Model FR is a vertical lifting tool for relatively light work. It is small and easy to handle in capacities through three tons. It incorporates a "Lock Closed" feature which facilitates attaching the clamp to the plate.

Renfroe Model J

The Model J is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical and back to horizontal through the same 90 degree arc.

Renfroe Model JP

The Model JP is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical and back to horizontal through the same 90 degree arc. Permits side loading of lifting shackle up to 90 degrees by derating of clamp's rated capacity. Model JP incorporates a pivoting shackle that permits side loading of the lifting shackle at 100 percent of rated capacity from vertical to 30 degrees, 75 percent of rated capacity between 30 and 45 degrees and 50 percent of rated capacity between 45 and 90 degrees.

Renfroe Model LJ

The MODEL LJ is a vertical lifting clamp capable of turning a plate from horizontal to vertical and back through the same ninety-degree arc. It is small and easy to handle in capacities through three tons. The MODEL LJ incorporates a “Lock Closed” feature, which facilitates attaching the clamp to the plate.

Renfroe Model M

The Model M is a multipurpose clamp used for positioning, sorting, erection and handling of prefabricated sections. The split lower jaw enables the clamp to be particularly useful in handling structural shapes. The Model M incorporates a "Lock Closed" feature which facilitates attaching the clamp to the member being lifted and makes it an ideal horizontal locking plate clamp. It is recommended for use in pairs and sets of pairs. Handle is available on 8 ton clamp only.

Renfroe Model TL

The Model TLA is a vertical lifting clamp incorporating a 'Lock Open'and a 'Lock Closed' feature and an auxiliary lock. The clamp is capable of turning a steel plate from horizontal to vertical to horizontal through a 180 degree arc. The 'Lock Open', 'Lock Closed' feature facilitates attaching and removing the clamp from the plate.