|
Are you looking for:
|
20 Ton Anchor Shackle, Screw Pin, 1-1/2" Carbon
Shackle - Class 2 Screw Pin Anchor - Carbon
- All shackles meet or exceed Federal Specification RRC-271D
- Working Load Limit and traceability codes shown as permanent marking on body
and pin
- Available in painted, galvanized and self-colored finishes (Painted Standard)
- All shackles have alloy quenched and tempered pins
- Shackles made from technically advanced microalloy material
- Load break tests consistently show microalloy outperforms quenched and tempered
carbon material
- Shock load testing of assemblies at -300°F consistently demonstrate microalloy
outperforms quenched and tempered carbon material*
- Shackles exhibit extreme deformation before failure*
- Design factor 6:1
*Independent lab verified
(Product
Specs)
WARNING |
To Avoid Injury
- Do not exceed working load limit
- Always follow safe rigging practices
- Do not shock load or impact load
- Do not replace pin with other than original equipment parts
- Always inspect for wear and or damage before use.
- Replace if damaged or worn
- Please note side load limitations
|
|
17 Ton Anchor Shackle, Screw Pin, 1-3/8" Carbon
Shackle - Class 2 Screw Pin Anchor - Carbon
- All shackles meet or exceed Federal Specification RRC-271D
- Working Load Limit and traceability codes shown as permanent marking on body
and pin
- Available in painted, galvanized and self-colored finishes (Painted Standard)
- All shackles have alloy quenched and tempered pins
- Shackles made from technically advanced microalloy material
- Load break tests consistently show microalloy outperforms quenched and tempered
carbon material
- Shock load testing of assemblies at -300°F consistently demonstrate microalloy
outperforms quenched and tempered carbon material*
- Shackles exhibit extreme deformation before failure*
- Design factor 6:1
*Independent lab verified
(Product
Specs)
WARNING |
To Avoid Injury
- Do not exceed working load limit
- Always follow safe rigging practices
- Do not shock load or impact load
- Do not replace pin with other than original equipment parts
- Always inspect for wear and or damage before use.
- Replace if damaged or worn
- Please note side load limitations
|
|
1" NACM Industrial Chain 316L Stainless Steel
1" NACM Industrial Chain 316L Stainless Steel
|
Part # |
A (Size) |
B |
C |
D |
WLL |
BL |
WT |
|
S0602-0025 |
1" |
1.00" |
1.61" |
23,250" |
73,000 |
9.00 lb |
500 |
Grade S4 chain is made in the USA to "G4" dimensions. It fits many standard US windlasses and industrial applications. This chain fully complies with all requirements of the US National Association of Chain Manufacturers' specifications.
|
1/2" Bow Shackle 316 stainless with Screw Pin
1/2" Bow Shackle 316 Stainless with Screw Pin
|
Part # |
A (Size) |
B |
C |
D |
WLL |
WT |
|
S0116-00013 |
1/2" |
.51" |
1.04" |
2.33" |
2,500 |
.77 lb |
Suncor Stainless offers stainless steel shackles and shackle components for all marine, industrial and architectural needs. Our stainless steel shackles will meet and exceed your expectations. USA made stainless steel shackle components and custom stainless steel shackles are our specialty. Suncor Stainless has the widest selection of stainless shackles available to meet your quality marine hardware needs.
|
30 Ton Anchor Shackle, Screw Pin, 1-3/4" Carbon
Shackle - Class 2 Screw Pin Anchor - Carbon
- All shackles meet or exceed Federal Specification RRC-271D
- Working Load Limit and traceability codes shown as permanent marking on body
and pin
- Available in painted, galvanized and self-colored finishes (Painted Standard)
- All shackles have alloy quenched and tempered pins
- Shackles made from technically advanced microalloy material
- Load break tests consistently show microalloy outperforms quenched and tempered
carbon material
- Shock load testing of assemblies at -300°F consistently demonstrate microalloy
outperforms quenched and tempered carbon material*
- Shackles exhibit extreme deformation before failure*
- Design factor 6:1
*Independent lab verified
(Product
Specs)
WARNING |
To Avoid Injury
- Do not exceed working load limit
- Always follow safe rigging practices
- Do not shock load or impact load
- Do not replace pin with other than original equipment parts
- Always inspect for wear and or damage before use.
- Replace if damaged or worn
- Please note side load limitations
|
|